Genie 45-25
I have a Genie 45-25 that has problems with the platform not wanting to rotate counter clockwise. I think it is a 2003 ..ford dual fuel with electronic fuel injection. 2100 hrs. on the machine I can't...
View ArticleGrove SM4688XT Scissor lift
I got a got one that I need a hand on. Got a Grove SM4688XT lift. Parked it and everything was working well. After 3 days, i needed it again and now everything works but the drive and the steering. I...
View Articlecase 585e and 586e with 7500 hours
I know the 585 is rated at 5000 lb lift and 586 is 6000 for the first 12' but after that, they are rated exactly the same.. 4000 to 15' then 2500 to 21'. Operating weight of the 586 is only 360 lbs...
View Articlesnorkle uno, hydraulic functions not working
I've got an early 2000'S snorkel uno manlier that's recently started to give me problems. The level out bucket function won't work although you can hear the pump run when you push the switch. Also, the...
View Articletilt on the forks
I have a 95 644 Highlander that I just purchased. It came without a service manual, so would like some advice as to fixing. The tilt on the forks do not work. I was able to see the parts manual, via...
View ArticleThe New verses the Old
Currently I have been running two different lifts on two different jobs, one being a brand new (26 hrs) JLG G6-42A from United and my old standby Ol' Blue a 1998 534D6. The JLG is rented by the GC on a...
View ArticleNeed service manual for a 644 highlander
Im in need of service manual for a 95, 644 highlander Lull. Please let me know if you can help me with this delima. Thanks timsigman59@hotmail.com
View Articlegrove mz46c boom lift
I am having trouble with a boom lift it is working fine in low speed but when switched into high speed the lift seems to slow down and stall. If i switch back inti low everything seems to go back to...
View Article70s Model F40 JLG man lift pump problems
Hi, I'm new to the forum but I'm hoping someone can help me. I bought this JLG F40 man lift in hopes that I could fix it up to use around the ranch. Unfortunately it appears that I need to replace the...
View Articlewhats the best telehandler
I work for a masonry company and we are thinking about getting new telehandlers we have lulls now i am leaning towered cat any opinions on any telehandler would be vary helpful thanks
View ArticleSupport for a IR VR518 telehandler
Good day, we have been trying to get parts and manuals for this machine but no luck. Does anyone know who supports these machines? Our location is Edmonton, Alberta, Canada.
View ArticleClik here to view.
Compact rough terrian forklifts
I need a compact forklift that can get around on gravel and snow pack, yet is still small enough to use in the shop. Need a 5,000lb lift cap. Currently I am using a 5,000lb Mitsubishi with pneumatic...
View Article2000 lull 644b trans problem
I'm new to this forum I bought this machine this winter the transmission is zf 3wg100 it shifts fine but when moving it bogs down and won't gain much speed I changed fluid and put in 10w30 didnt change...
View Articleskytrac frame levelers
Hi I am a small subcontract framer and i have a 6042 skytrac 2005 that I could use some advice on regarding the frame levelers .The front piston works but the rear is not moving like the stabil trac...
View ArticleNeed education/advice on rebuilding telescopic main cylinder on Cat TC30...
I have a little cat tc30 fork lift. the main cylinder is drooling out the bottom and the forks drift down. I cannot seem to locate any information on how to properly disassemble and reassemble the...
View ArticleLull horn assembly issue, how to fix?
I am an operator for a masonry company and the machine they just rented has a issue with it's horn. It's nothing worth calling the rental company. I'm working in the city and having to drive in the...
View ArticleGenie manlift
I have a Genie Z-45/25 manlift. The primary boom function works ok extending to lift boom but doesn't want to retract to lower boom. It seems to malfunction worse as the hydraulic system heats up. all...
View ArticleJLG 40 H only travels is one direction
New and need help. We have an older jlg 40H lift, mid 80's model which is all hydraulic. it only drives in one direction. Switched the lines in the platform control panel, no difference; switched...
View ArticleGehl DL-6H wet brake issues
Does anybody have any service literature or clues where to find it for these? I have one that absolutely sprays hydraulic oil out the axle breather when you release the parking brake. Thanks in advance...
View Articlefork aux line couplers
Hi Im here again asking a newb question ,I am about to change out the aux hydraulics line to the side tilt fork carriage and want to make it into quick couplers which it is not now.I dont know what I...
View Article